Feature Coding


Please contact us for an up-to-date, more complete, fill-able order form.


Compatibility (All Modern BMW E-series and F-series, Mini, and Rolls Royce)
BMW 1-series: E81, E82, E87, E88, F20, F21, F44, F45, F46
BMW 2-series: F22, F23
BMW 3-series: E46, E90, E91, E92, E93, F30, F31, F34, F35, F80
BMW 4-series: F32, F33, F35, F36, F82, F83
BMW 5-series: E39, E60, E61, F07, F10, F11, F18
BMW 6-series: E63, E64, F06, F12, F13
BMW 7-series: E65, E66, F01, F02, F03, F04
BMW X-series: E53, E70, E71, E72, E83, F25, F15, F16, F25, F26, F48
BMW Z-series: E52, E85, E86
BMW i3: I01
BMW i8: I12
BMW M-series: F80, F82, F83, F10, F06, F12, F13, F15
Alpina F-series variants: D3, B3, B4, XD3, D5, B5, B6, B7
Mini: R55, R56, R57, F55, F56
Rolls-Royce: RR01, RR02, RR03, RR04, RR05

Please note that there are more specialized options available in addition to the popular ones listed here. Depending on your car’s year and equipped options, some features may not be available.

Restraint and Airbags:

  1. Disable seatbelt chime/gong for driver and/or passenger
  2. Disable passenger occupancy mat
  3. Disable certain airbags & restraint system errors (e.g., if you install aftermarket racing seats)
  4. Disable seatbelt butler (extender arm) (E92)

iDrive and Information Display:

  1. Enable video/DVD-in-motion (CIC/NBT iDrive only)
  2. Disable iDrive legal disclaimer on start-up (“press accept” message)
  3. Disable speed locks (BT pairing, owner’s manual, etc.)
  4. Disable other disclaimers (for PDC, rear-view camera, etc.)
  5. Show individual tire pressures and temperatures in TPMS display screen
  6. Enable fuel stop suggestion option (CIC/NBT iDrive only)
  7. Add a weatherband option to the radio in addition to AM/FM, etc.
  8. Allow AM/FM and Mode buttons to be used as two additional preset buttons
  9. Change start-up splash screen to “M” animation (NBT iDrive only)
  10. Enable EfficientDynamics Sport Displays (horsepower & torque)
  11. Change ringtone (different ring or transfer phone’s ringtone to car)
  12. Add rain/light sensor options (headlight sensitivity) and daytime running light control to iDrive
  13. USB video playback/storage (NBT iDrive, F-series only)
  14. Special codec support (XVCD/XVID/OGG) (NBT iDrive only)

Car Access and Convenience:

  1. Enable ability to open and close windows and sunroof with the keyfob (and Comfort Access, if equipped)
  2. Enable ability to fold and unfold mirrors with the keyfob (and Comfort Access, if equipped)
  3. Enable ability to close motorized trunk/liftgate with in-car button and/or keyfob
  4. Automatically unlock the doors when key is removed or car is turned off (won’t have to pull the door handle twice)
  5. Automatically pop the key out when car is turned off (won’t have to press it in first)
  6. Turn off navigation/radio when engine is turned off and driver’s door is opened (F-series)
  7. Enable one-touch operation of the sunroof, and windows while the door is open
  8. Enable ability to open and close motorized tailgates with the keyfob (and Comfort Access, if equipped)
  9. Enable ability to open and close the convertible top with the keyfob (requires Comfort Access)
  10. Automatically close the sunroof when rain is detected (only when car is running)
  11. Disable the headlight washer system and/or autodimming exterior mirrors
  12. Allow the windshield wipers to complete the cycle even if the car is turned off (so they don’t get stuck)
  13. Allow AC fan to remember to stay off if powered off last time
  14. Allow AC re-circulation setting to be remembered
  15. Disable or customize Active Sound Design (ASD) (F-series) (e.g., M3/M4 sound in 320i)
  16. Enable memory for engine Auto Stop/Start (MSA) feature


  1. Disable amber corner lights and/or LEDs when headlights or parking lights are on (turn signals will still work)
  2. Disable or customize cornering lights (e.g., set fog lights as cornering lights)
  3. Activate and customize welcome lights (fading or instant-on for angel eyes, corner lights, fog lights, rear fog lights, tail lights, brake lights, parking lights, high and low beams)
  4. Enable, disable, or customize daytime running lights (DRLs)
  5. Set angel eyes as DRL instead of high beams (for cars built after 03/2007)
  6. Use bi-xenons for “flash-to-pass” instead of inner high beam bulbs
  7. Allow fog lights and high beams to be used simultaneously
  8. Enable emergency/hazard lights to double-blink instead of single blink
  9. Turn off cold and/or hot monitoring checks for any lights (to remove errors for LED or HID aftermarket bulbs)
  10. Adjust angel eye brightness / voltage
  11. Allow rear fog lights to work in tandem with brake lights for greater visibility
  12. European blinking brake-force display (BFD2)
  13. Code LCI tail light retrofits on pre-LCI cars (to get rid of errors and fast blinkers)
  14. Enable ability to set the sensitivity of the automatic headlights via iDrive or the instrument cluster
  15. Enable “pathway lighting” with keyfob
  16. High-beam assistant on by default (some cars only)
  17. Door-handle LEDs on when car is in reverse (some F-series)

Instrument Panel and Cluster:

  1. Disable chime/gong when key is left in the ignition with the door open
  2. Headlight sensitivity options within BC menu (some E-series)
  3. Enable digital speedometer (that shows the car’s actual speed) in addition to existing options
  4. Enable display of turn signals, entertainment details, phonebook details, and phone call information in head-up display (HUD)
  5. Enable EfficientDynamics sport displays (to show engine power and torque)
  6. Enable instantaneous / real-time digital MPG in addition to existing options
  7. Turn on EfficientDynamics shift indicator to maximize fuel economy (manual transmission E-series only)
  8. Customize reserve fuel warning threshold (1/4, 1/8 tank)
  9. Enable the cluster backlight to be on even if the headlights are off
  10. Enable M-Performance logo in cluster (some F-series only)

Performance and Miscellaneous:

  1. Read and clear BMW-specific error codes for all modules in the car
  2. Transmission software updates (e.g., Alpina B3 transmission flash for 335i, Euro or GTS DCT/SMG for M3/M5/M6)
  3. DME software updates (e.g., 241E for E9x M3)
  4. European M-Dynamic Mode (MDM) calibration for M-cars
  5. Retrofit coding for BMW OEM equipment such as LCI tail lights, HD radio, satellite radio, security alarm, Bluetooth, Performance accessories, etc.
  6. Replacement module coding
  7. Battery coding and registration
  8. Calibration for fuel injector replacement (N54/N55)
  9. Disable systems such as airbags, EDC, PDC, TPMS, and more